01.15.1 Hire and Installation of Compression Testing Machine with necessary accessories, machine calibration for testing of concrete cylinders, with Compressive Strength Testing Machine of
Rated Capacity: 2000kN, Four Column Frame, Frame Material: Mild Steel, High Frame Stiffness, Diameter of Each Column: Minimum 60 mm, Vertical Clearance: Minimum 320 mm, Piston Stroke: Minimum 100 mm, Piston Diameter: Minimum 250mm, Rated Pressure of the Hydraulic Pump: Minimum 40MPa, Size of the Bearing Plate: Minimum 320x260mm, Outside size: Minimum 950×400×1160mm, Max. piston lift speed: Minimum 50mm/min, Piston free back speed: Minimum 20mm/min, Weight of the Machine : Minimum 500KG, Noise: ≤80Db, Relative indication error: ±1%, Powersupply: 220VAC 750W, Sample Height would be adjusted by screw Column (Movable upper platen), Load Measurement: Load would be Measured Pressure Sensor, Digital Display would show the Current Load and Peak Load, The maximum force value can be maintained and the data measured can be saved when the power is off, The test data can be processed automatically and the test report can be printed, Machine Control: Machine Speed would be controlled by pressure Compensated flow Control Valve.;
This item also includes steel unbonded caps for capping of specimen, Elastomeric neoprene pads for capping of specimen, Slide Calipers for measuring dia of specimen, Cylinder mold of 100mm x 200mm Side wall thickness: 5mm; 10mm tamping rod, 300mm long; Rubber mallet; Metal tray for concrete cylinder preparation etc. with required number test work. All complete & accepted by the Engineer-in-charge.
(Rate is including the cost of Compression Testing Machine Initial Calibration. Calibration should be performed once in every 12 months)
Cost per month considering 12 months project period
