| SL# | Item Code | Item Description | Unit |
Rate for ZoneA Dhaka & Mymensingh Division |
Rate for ZoneB Chattogram & Sylhet Division |
Rate for ZoneC Rajshahi & Rangpur Division |
Rate for ZoneD Khulna & Barishal Division |
|---|---|---|---|---|---|---|---|
| DIVISION 12 : DOOR-WINDOW SHUTTER & FLY PROOF WIRE-NET SHUTTER | |||||||
| 711. | 12.17.2 | Supplying, fitting and fixing M.S. door shutters made with 38 mm x 38 mm x 6 mm angle outer frame, inner member 25 mm x 6 mm F.I. bar, cladding with 16 BWG M.S. sheet, 04 nos 75 mm long hinge, 02 nos. locking arrangement with 50 mm x 50 mm x 6 mm M.S. angle chowkat including all charges for welding, riveting etc. including cost of supplying all essential fittings like iron hinges, socket bolts, clamps, for fittig and fixing the frame, making necessary holes in brick walls and R.C.C works and fitting with C.C. (1:2:4) and mending good the damages including all cost of carriage, workshop charges, electricity and labour for fittings, fixing, curing etc. all complete and accepted by the Engineer-in-charge. (Rate is excluding the costs of painting). | sqm | 7631 | 7757 | 7540 | 7540 |
| 712. | 12.18 | Supplying, fitting and fixing steel glazed window shutters for all floors with frames as per design having 19mm x 19mm x 19mm x 3mm Z-section in frame and 19mm x 3mm F.I. bar for making T-section for horizontal dividers of shutters and 25mm x 3mm F.I. bar for middle vertical members of frame including all cost of charges for fabrication and manufacture by welding, riveting, etc. Supplying all essential fittings like 2 nos stopper handle, 300mm long 3 or 2 nos adjustable iron cleats, 6 or 4 nos 50mm long iron pin hinges, 150mm long 4 nos clamps including supplying, fitting, fixing 3mm glass panes by pucca putty, for fitting and fixing frame making necessary holes in brick and R.C.C. wall or member as necessary filling with C.C. (1:2:4) and mending good the damages including all cost of carriage, electricity, workshop charges and labour for fitting, fixing, etc. all complete as per drawing and design and accepted by the Engineer-in-charge. (Rate is excluding the costs of painting) | |||||
| 713. | 12.18.1 | With provision for fan-light by providing necessary additional materials, 03 nos adjustable 300 mm long iron cleats and 6 nos 50 mm long iron pin hinges (total wt of grill without glass panes is min 28.13 kg for 15 sft) | sqm | 4399 | 4505 | 4498 | 4497 |
| 714. | 12.18.2 | Without provision for fan-light by providing 02 nos adjustable 300 mm long iron cleats and 4 nos 50 mm long iron pin hinges (total wt of grill without glass panes is min 24.84 kg for 15 sft) | sqm | 4111 | 4205 | 4197 | 4196 |
| 715. | 12.19 | Manufacturing, supplying fitting and fixing of fixed glazed frame for all floors with outer member of 19mm x 19mm x 19mm x 3mm Z-section and vertical and horizontal dividers of 19mm x 19mm x 3mm T-section including all cost of fabrication and welding, supplying and fixing of 19mm x 19mm x 3mm angle clamps of 150mm long (with one end bifurcated) of required Nos with the frame, fixing the frame in wall with (1:2:4) cement concrete in the hole for clamp after making necessary grooves, supplying and fixing of 3mm glass panes with pucca putty, mending good all damages, painting iron face with two coats of synthetic enamel paint over a coat of anti-corrosive priming of approved colour and quality etc. cost of electricity, workshop charges, carriage etc. all complete as per drawing and accepted by the Engineer-in-charge. [Rate is excluding the cost of painting] (Scope of work of this item is in staircase and over partition wall etc.) | sqm | 4042 | 4084 | 4075 | 4073 |
| 716. | 12.2 | Supplying, fitting and fixing 38 mm thick well matured (moisture content should be between 12 to 16%) wooden ornamental special design (both sides) single panel flush door shutter having stile, top rail and lock rail section 125 x 38mm and bottom rail section 225mm x 38mm (made from minimum 250mm wide plank) with 4nos 100mm long, 3mm thick hinge, 12mm dia 250mm long tower bolt, 12mm dia 200mm long socket bolt, 2nos 150mm long handle, hinged cleats and buffer blocks. All complete in all floors and accepted by the Engineer-in-charge. (All sizes of wood are finished) | |||||
| 717. | 12.2.1.1 | Chattogram Teak (SS Fittings) | sqm | 14870 | 14601 | 15046 | 15046 |
| 718. | 12.2.1.2 | Chattogram Teak (Brass Fittings) | sqm | 15271 | 15002 | 15448 | 15448 |
| 719. | 12.2.2.1 | Myanmar(Burma) Teak (SS Fittings) | sqm | 21121 | 22937 | 23153 | 23153 |
| 720. | 12.2.2.2 | Myanmar(Burma) Teak (Brass Fittings) | sqm | 21523 | 23338 | 23554 | 23554 |
