| SL# | Item Code | Item Description | Unit |
Rate for ZoneA Dhaka & Mymensingh Division |
Rate for ZoneB Chattogram & Sylhet Division |
Rate for ZoneC Rajshahi & Rangpur Division |
Rate for ZoneD Khulna & Barishal Division |
|---|---|---|---|---|---|---|---|
| DIVISION 14 : ALUMINIUM DOOR, WINDOW FRAME & GLASS WORKS | |||||||
| 871. | 14.19 | Supplying, fitting and fixing of aluminium curtain wall with aluminium top hung/casement windows as per the US Architectural Aluminium Manufacturer's Association (AAMA) standard specification and BDS 1879:2014 having 100 mm , 50mm, 2mm curtain wall sub-mullim outer and inner frame, 3.0 mm thick casement shutter (size 58.40 mm, 37.20 mm,57.40 mm ), 1.2 mm thick shutter glass strips, all aluminium member will be powder coated with coat not less than 1.5 micron in thickness including all accessories 4 bar hinge casement handle, 50 mm x 50 mm x 6 mm aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. | sqm | 12117 | 12102 | 11944 | 11944 |
| 872. | 14.2 | Supplying fitting and fixing of aluminium swing door as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having 1.5 mm thick wall frame (size 101.60 mm, 44.45 mm, 83.21 mm), 2.0 mm thick shutter side (size 54 mm, 46 mm), 0.99 mm thick door glass bit (size 16.54 mm, 15.49 mm, 0.115 kg/m), 1.8 mm thick clousure section (size 101.60 mm, 42.93 mm),1.5 mm thick 106.60 mm clousure cover (0.392 kg/m), 4 mm thick floor bottom (size 101.60 mm, 12.70 mm, 1 kg/m), 1.8 mm thick shutter bottom (size 82.6 mm, 43.99 mm, 0.60 kg/m), 1.8 mm thick shutter top (size 51 mm, 43.99 mm, 1.88 kg/m) and 2.3 mm to 4.01 mm thick handle (size 101.60 mm, 38.10 mm, 25.40 mm short, 1.35 kg/m) section of all aluminum members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like swing door clousure, swing door lock, swing door mohiar, labour charge, fabrication, fitting fixing in position, carriage and electricity charge keeping provision for fitting 5 mm thick glass including neoprene sealant etc. complete in all respect as per drawing and accepted by the Engineer-in-charge. | |||||
| 873. | 14.2.1 | Anodized to any colour | sqm | 7588 | 7876 | 7823 | 7823 |
| 874. | 14.2.2 | Powder coated to any colour | sqm | 8274 | 8442 | 8389 | 8389 |
| 875. | 14.20 | Supplying, fitting and fixing of aluminium curtain wall and aluminium top hung/casement windows ad per the US Architectural Aluminium Manufacturer's Association (AAMA) standard specification and BDS 1879:2014 having 50 mm , 50 mm, 2 mm curtain wall sub-mullim outer and inner frame,3.0 mm thick casement shutter (size 58.40 mm, 37.20 mm,57.40 mm ) ,1.2 mm thick shutter glass strips, all aluminium member will be powder coated with coat not less than 1.5 micron in thickness including all accessories 4 bar hinge casement handle, 50 mm x 50 mm x 6 mm aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. | sqm | 10680 | 10666 | 10507 | 10507 |
| 876. | 14.21 | Supplying, fitting and fixing of aluminium curtain wall along with 10 mm thick clear tempered glass as per the US Architectural aluminium Manufacturer's Association (AAMA) Standard Specification and BDS 1879:2014 having 115 mm , 64 mm, 3 mm curtain wall sub-mullim outer and inner frame, 3.0 mm thick casement shutter (size 58.40 mm, 37.20 mm,57.40 mm ) ,1.2 mm thick shutter glass strips, all aluminium member will be powder coated with coat not less than 1.5 micron in thickness including all accessories 4 bar hinge casement handle, 50 m x 50mm x 6m aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. | sqm | 12005 | 11999 | 11923 | 11923 |
| 877. | 14.22 | Supplying, fitting and fixing of 12 mm thick clear tempered glass wall upto 3.0 m height with vertical fin glass support of same thickness and support shall be at least 1.2 m c/c fixed properly with glass by silicon glue with supply and fittings of all required accessories such as SS u channel, nut bolts, aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in- charge. | sqm | 21510 | 21500 | 21414 | 21414 |
| 878. | 14.23 | Supplying, fitting and fixing of 12 mm thick tempered glass wall from 3.0 m to 6.0 m height with spider point fixing joint and vertical fin glass support of same thickness, support shall be at least 1.2 m c/c fixed properly with main glass by silicon glue with supply and fittings of all required accessories such as SS u chennel, nut bolts, aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. | sqm | 22891 | 22885 | 22805 | 22805 |
| 879. | 14.24 | Supplying, fitting and fixing of 12 mm thick clear tempered glass wall from 6.0 m to 8.2 m height with spider point fixing joint and vertical/ horizontal fin glass support of double thickness, support shall be at least 2 m c/c fixed properly with main glass by silicon glue with supply and fittings of all required accessories such as SS u chennel, nut bolts, aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. | sqm | 23545 | 23542 | 23458 | 23458 |
| 880. | 14.25 | Supplying fitting and fixing of aluminium box fixed louver as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification having 50mm x 25 mm, 1.5 mm thick outer section and horizantally @ 75 mm c/c fixed with above mentined frame and all aluminium members will be anodized to aluminium with a coat not less than 15 micron in thickness and density of 4 mg per square cm etc. including all accessories, neoprene, sealant, nuts and bolts etc. complete in all respect as per drawing and accepted by the Engineer. | OK | ||||
