| SL# | Item Code | Item Description | Unit |
Rate for ZoneA Dhaka & Mymensingh Division |
Rate for ZoneB Chattogram & Sylhet Division |
Rate for ZoneC Rajshahi & Rangpur Division |
Rate for ZoneD Khulna & Barishal Division |
|---|---|---|---|---|---|---|---|
| DIVISION 14 : ALUMINIUM DOOR, WINDOW FRAME & GLASS WORKS | |||||||
| 921. | 14.9.2.2 | Powder coated to any colour | sqm | 7704 | 8340 | 8285 | 8285 |
| 922. | 14.9.3 | Size up to: 762 mm x 610 mm | |||||
| 923. | 14.9.3.1 | Anodized to any colour | sqm | 14305 | 15340 | 15190 | 15190 |
| 924. | 14.9.3.2 | Powder coated to any colour | sqm | 15579 | 16779 | 16629 | 16629 |
| DIVISION 15 : CEMENT PLASTER, FAIR-FACE PLASTER AND POINTING WORKS | |||||||
| 925. | 15.1.1 | Minimum 12 mm thick cement sand (F.M. 1.2) plaster (1:4) with fresh cement to both inner-and outer surface of wall, finishing the corner and edges including washing of sand, cleaning the surface, curing at least for 7 days, cost of water, electricity, scaffolding and other charges etc. all complete in all respect as per drawing and accepted by the Engineer-in-charge. (Cement: CEM-II/B-M) ground floor. | sqm | 323 | 320 | 302 | 302 |
| 926. | 15.1.2 | Minimum 12 mm thick cement sand (F.M. 1.2) plaster (1:4) with fresh cement to outer surface of wall, finishing the corner and edges including washing of sand, cleaning the surface, curing at least for 7 days, cost of water, electricity, scaffolding and other charges etc. all complete in all respect as per drawing and accepted by the Engineer-in-charge. (Cement: CEM-II/B-M) ground floor. | sqm | 340 | 336 | 318 | 318 |
| 927. | 15.10 | Providing drip course or nosing at the edge of sunshade or cornice with cement sand (F.M. 1.2) mortar (1:2) with fresh cement, curing at least for 7 days, cost of water, electricity, scaffolding and other charges etc. all complete in all respect as per drawing and accepted by the Engineer-in-charge. | meter | 170 | 169 | 157 | 157 |
| 928. | 15.11.1 | Making groove in plaster on outside wall upto 50 mm X 6 mm size including scaffolding, curing etc. complete as per drawing and accepted by the Engineer-in-charge. | meter | 33 | 33 | 31 | 31 |
| 929. | 15.11.2 | Making groove in plaster on outside wall upto 38 mm X 6 mm size including scaffolding, curing etc. complete as per drawing and accepted by the Engineer-in-charge. | meter | 48 | 47 | 44 | 44 |
| 930. | 15.12 | Minimum 10 mm thick fair face plaster using premix cement plaster (CP2 LGT/Stucco base premix or equivalent); initial background should be 19 mm rough cement plaster (1:4); then after passing 7 days curing time surface of newly constructed rough plaster should be throughly cleaned using a stiff brush to remove any dust, loose particles, wood pieces, mould oil etc, then the backgound needs to be throughly neutralized by applying potable water; Mixing premix cement plaster with water at water/powder ratio according to the specification of the manufacturer to form paste and apply on rough plaster surface; powder for making paste must be mixed with potable water only; apply the paste on the rough plaster surface by trowel to get smooth and shiny surface and cure the finished plaster suface for 2-3 days(3-4 times daily); finally water repellent coating to protect concrete surface; all complete with necessary scaffolding etc. accepted by the Engineer-in-charge.(Rate is excluding the cost of 19 mm thick rough cement plaster and water repellent paint) Ground Floor | sqm | 2047 | 2304 | 2255 | 2255 |
