| SL# | Item Code | Item Description | Unit |
Rate for ZoneA Dhaka & Mymensingh Division |
Rate for ZoneB Chattogram & Sylhet Division |
Rate for ZoneC Rajshahi & Rangpur Division |
Rate for ZoneD Khulna & Barishal Division |
|---|---|---|---|---|---|---|---|
| DIVISION 10 : STRUCTURAL STEEL WORKS, SHEET ROOFING AND SAFETY CANOPY | |||||||
| 601. | 10.34 | Supply, fabrication, installation and taking out of 1.2 m hight temprary safety fencing at diffrent floor during construction work around the outer periphery of building or around the punch in the floor slab for safety of the worker during construction, which shall be made of 10mm dia MS Rod @ 450mm C/C both way welded at each point togather with a 12mm Dia MS Rod as top rail drilled anchored to the floor and sides as necessary all complete and accepted by the Engineer-in-charge( Salvage materials shall be the contractors property after completion of work.). | sqm | 380 | 380 | 380 | 380 |
| 602. | 10.35 | Providing bearing joints fixed or free with 250 mm x 375 mm x 10 mm M.S. (Grade - A36) plate fitted in the truss angles with 16 mm diameter M.S. rod counter sunk rivets, welded and anchored to 250 x 375 x 10 mm. M.S. plate by two Nos. 19 mm dia M.S. “U” rod embedded in the bed of the lintel around the reinforcement, cleaning and greasing the joints for all floors etc. all complete and accepted by the Engineer-in-charge | each | 2942 | 2934 | 2903 | 2903 |
| 603. | 10.36 | Galvanization: Galvanization of finished structural steel built-up and hot rolled finished materials of any shape and size (average thickness not more than 8 mm) conforming to the requirement of the corrosion class C3 and Galvanization shall be performed in accordance with ASTM A123 all complete as per drawing, specification and direction of engineer in charge | kg | 71 | 71 | 71 | 71 |
| 604. | 10.37 | Additional Erection and installation charge for items 10.2~10.6 and 10.18 shall be 2% of the gross item rate for every four floor above level-4 | |||||
| 605. | 10.4 | Supply, fabrication and installation of hot-rolled sections (W, H, I-shape etc.) for columns, beams, rafters, bracings etc. (up to level-4) conforming to ASTM A36, with a minimum yield strength of 250 MPa, including the cost of testing of plates, application of red/grey-oxide primer etc. all complete as per drawing, specification and direction of Engineer-in-charge. | kg | 131 | 182 | 182 | 182 |
| 606. | 10.5 | Supply, fabrication and installation of hot rolled structural grade steel pipe and tube of any thickness conforming to ASTM A283 with a minimum yield strength of 275 MPa, including the cost of testing, application of red/grey-oxide primer etc. (up to level-4) all complete as per drawing, specification and direction of Engineer-in-charge. | kg | 200 | 200 | 200 | 200 |
| 607. | 10.6 | Supply, fabrication and installation of hot rolled structural grade steel channel and angle in roof truss or any form of structure of any thickness conforming to ASTM A36 with a minimum yield strength of 250 MPa, including the cost of testing, application of red/grey-oxide primer etc. (up to level-4) all complete as per drawing, specification and direction of Engineer-in-charge. | kg | 129 | 135 | 135 | 135 |
| 608. | 10.7 | Supply and fabrication of built-up sections for shore piles from steel plates conforming to ASTM A36, with a minimum yield strength of 250 MPa, including the cost of testing of plates, application of red/grey-oxide primer etc. all complete as per drawing, specification and direction of Engineer-in-charge (Salvage materials shall be the contractors property after completion of the work, rate is excluding the cost of driving and taking out). | kg | 68 | 87 | 87 | 87 |
| 609. | 10.8 | Supply and fabrication of hot rolled structural grade steel Sections of any thickness conforming to ASTM A36 with a minimum yield strength of 250 MPa for shore piling , including the cost of testing , application of red/grey-oxide primer etc. all complete as per drawing, specification and direction of Engineer-in-charge( Salvage materials shall be the contractors property after completion of work, rate is excluding the cost of driving and taking out). | kg | 53 | 73 | 73 | 73 |
| 610. | 10.9 | Supply ,fabrication, installation and de-installation of built-up sections for shore pile bracing at any level basement work from steel plates conforming to ASTM A36, with a minimum yield strength of 250 MPa, including the cost of testing of plates, application of red/grey-oxide primer etc. all complete as per drawing, specification and direction of Engineer-in-charge( Salvage materials shall be the contractors property after completion of work). | kg | 88 | 106 | 106 | 106 |
