| SL# | Item Code | Item Description | Unit |
Rate for ZoneA Dhaka & Mymensingh Division |
Rate for ZoneB Chattogram & Sylhet Division |
Rate for ZoneC Rajshahi & Rangpur Division |
Rate for ZoneD Khulna & Barishal Division |
|---|---|---|---|---|---|---|---|
| DIVISION 19 : COLLAPSIBLE GATE, M.S. GATE, ROLLING SHUTTER ETC. | |||||||
| 1071. | 19.1.1.1 | for S.S. Grade A304 | sqm | 19356 | 19337 | 19212 | 19212 |
| 1072. | 19.1.1.2 | for S.S. Grade A201 | sqm | 15428 | 15409 | 15284 | 15284 |
| 1073. | 19.1.2 | Manufacturing, supplying, fitting and fixing S.S. collapsible gate of any design and shape made of 20 mm x 20 mm x 3 mm S.S. angle placed @ 112 mm c/c vertically and connecting the same with each other by 20 mm x 3 mm S.S flat bar scissors 525 mm, 600 mm long provided in 3 rows including cutting the different S.S. members to required sizes, fabricating, welding, riveting with required size rivets, providing required size wheels, pulling handles on both sides, suitable locking arrangement, electrodes, grease and finally placing the same in position in between 2 (two) nos. 50 mm x 50 mm x 6 mm S.S. tee rail made by welding 2 nos. 50 mm x 6 mm S.S. flat bar fitted and fixed at top and bottom with R.C.C. lintel/ roof slab, floors and side wall with required Nos. 150 mm to 225 mm long 38 mm x 6 mm S.S. flat bar clamps one end welded with the gate member and the other end bifurcated and embedded in C.C. at the respective point including cutting holes and mending good the damages by pouring concrete (1:2:4) into the holes and finishing, both end carriage, including polishing, greasing, electrodes, curing etc. complete as per drawing and design and accepted by the Engineer-in-charge. | |||||
| 1074. | 19.1.2.1 | for S.S. Grade A304 | sqm | 16156 | 16138 | 16013 | 16012 |
| 1075. | 19.1.2.2 | for S.S. Grade A201 | sqm | 12713 | 12694 | 12569 | 12569 |
| 1076. | 19.1.3 | Manufacturing, supplying, fitting and fixing M.S. collapsible gate of any design and shape made of 25 mm x 25 mm x 3 mm M.S. angle placed @ 112 mm c/c vertically and connecting the same with each other by 25 mm x 3 mm M.S flat bar scissors 525 mm, 600 mm long provided in 3 rows including cutting the different M.S. members to required sizes, fabricating, welding, riveting with required size rivets, providing required size wheels, pulling handles on both sides, suitable locking arrangement, electrodes, grease and finally placing the same in position in between 2 (two) Nos. 50 mm x 50 mm x 6 mm M.S. tee rail made by welding 2 nos. 50 mm x 6 mm M.S. flat bar fitted and fixed at top and bottom with R.C.C. lintel/ roof slab, floors and side wall with required nos. 150 mm to 225 mm long 38 mm x 6 mm M.S. flat bar clamps one end welded with the gate member and the other end bifurcated and embedded in C.C. at the respective point including cutting holes and mending good the damages by pouring concrete (1:2:4) into the holes and finishing, etc. complete, painting 2 (two) coats with approved best quality synthetic enamel paint over a coat of anticorrosive painting, both end carriage, including greasing, electrodes, curing etc. complete as per drawing and design and accepted by the Engineer-in-charge. (Rate is excluding the cost of painting) | sqm | 5993 | 6131 | 5997 | 5996 |
| 1077. | 19.1.4 | Manufacturing, supplying, fitting and fixing M.S. collapsible gate of any design and shape made of 20 mm x 20 mm x 3 mm M.S. angle placed @ 112 mm c/c vertically and connecting the same with each other by 20 mm x 3 mm M.S flat bar scissors 525 mm, 600 mm long provided in 3 rows including cutting the different M.S. members to required sizes, fabricating, welding, riveting with required size rivets, providing required size wheels, pulling handles on both sides, suitable locking arrangement, electrodes, grease and finally placing the same in position in between 2 (two) nos. 50 mm x 50 mm x 6 mm M.S. tee rail made by welding 2 nos. 50 mm x 6 mm M.S. flat bar fitted and fixed at top and bottom with R.C.C. lintel/roof slab, floors and side wall with required Nos. 150 mm to 225 mm long 38 mm x 6 mm M.S. flat bar clamps one end welded with the gate member and the other end bifurcated and embedded in C.C. at the respective point including cutting holes and mending good the damages by pouring concrete (1:2:4) into the holes and finishing, etc. complete, painting 2 (two) coats with approved best quality synthetic enamel paint over a coat of anticorrosive painting, both end carriage, including greasing, electrodes, curing etc. complete as per drawing and design and accepted by the Engineer-in-charge. (Rate is excluding the cost of paint). | sqm | 5182 | 5278 | 5143 | 5143 |
| 1078. | 19.10 | Manufacturing, supplying, fitting and fixing SS Sliding front gate of any design and shape made of 50 mm x 50mm x 1.5 mm S.S. box section as outer frame, 37mm x 37mm x 1.5 mm SS box section as vertical section @ 100 mm c/c fitted with outer frame, 25 mm x 25 mm x 1.5 mm SS box section as horizontal section , 37 mm x 1.5 mm SS round section fitted with vertical outer section for SS lettering, 25 mm dia SS solid round pipe & 3mm SS channel (62 mm x 62 mm) placed at bottom & top respectively, placing required number of solid hinges, SS wheel, SS locking arrangement, hasp bolt, tower bolt etc, fitting-fixing the gate by cutting hole and mending good the damages by pouring concrete(1:2:4) into the holes and hoisting the gate in position with necessary carriage,electrodes, curing, polishing, finishing, etc.complete as per drawing and design and accepted by the Engineer-in-charge . | |||||
| 1079. | 19.10.1 | for S.S. Grade A304 | sqm | 18476 | 18464 | 18360 | 18359 |
| 1080. | 19.10.2 | for S.S. Grade A201 | sqm | 14839 | 14826 | 14723 | 14722 |
