| SL# | Item Code | Item Description | Unit |
Rate for ZoneA Dhaka & Mymensingh Division |
Rate for ZoneB Chattogram & Sylhet Division |
Rate for ZoneC Rajshahi & Rangpur Division |
Rate for ZoneD Khulna & Barishal Division |
|---|---|---|---|---|---|---|---|
| DIVISION 19 : COLLAPSIBLE GATE, M.S. GATE, ROLLING SHUTTER ETC. | |||||||
| 1091. | 19.8.1 | for S.S. Grade A304 | sqm | 17041 | 17027 | 16911 | 16909 |
| 1092. | 19.8.2 | for S.S. Grade A201 | sqm | 14930 | 14916 | 14800 | 14799 |
| 1093. | 19.9 | Manufacturing, supplying, fitting and fixing SS Swing front gate of any design and shape made of 50 mm x 50mm x 1.5 mm S.S. box section as outer frame, 37mm x 37mm x 1.5 mm SS box section as vertical section @ 100 mm c/c fitted with outer frame, 25 mm x 25 mm x 1.5 mm SS box section as horizontal section , 37 mm x 1.5 mm SS round section fitted with vertical outer section for SS lettering, 25 mm dia SS solid round pipe, placing required number of solid hinges, SS wheel, SS locking arrangement, hasp bolt, tower bolt etc, fitting-fixing the gate by cutting hole and mending good the damages by pouring concrete(1:2:4) into the holes and hoisting the gate in position with necessary carriage,electrodes, curing, polishing, finishing, etc.complete as per drawing and design and accepted by the Engineer-in-charge . | |||||
| 1094. | 19.9.1 | for S.S. Grade A304 | sqm | 18130 | 18117 | 18014 | 18013 |
| 1095. | 19.9.2 | for S.S. Grade A201 | sqm | 14492 | 14479 | 14376 | 14375 |
| 1096. | 9.10.3 | Manufacturing, supplying, fitting and fixing double leaf SS Main gate made with 2mm thick 75mm x 75mm ss hollow box as outer frame, 1.5 mm thick 50mm X 25mm ss hollow box as inner frame with 1.5 mm thick, 19 mm x 19 mm SS hollow box for fencing @75mm c/c, 900 mm Long 25mm dia SS box handle, 350 mm long 20mm dia SS hatch bolt, 150mm x 38mm hinge base plate, 50 mm x 8 mm S.S plate for bottom rail, 75 mm dia SS wheel, 6 mm thick 12'' x 13'' box SS 16 gauge plate for locking arangement, 100 mm x 10 mm dia S.S. Rowel bolt, SS pad lock, fitting-fixing the gate by cutting hole and mending good the damages by pouring concrete(1:2:4) into the holes and hoisting the gate in position with necessary carriage,electrodes, curing, polishing, finishing, etc.complete as per drawing and design and accepted by the Engineer-in-charge. | |||||
| DIVISION 20 : STAIR & VERANDAH RAILING AND STAIR NOSING | |||||||
| 1097. | Providing nosing to the nose of tread of stair including supplying 3 nos. of 75 mm long 12 mm x 3 mm F.I./SS bar clamps with bifurcated ends in each treads including fitting and fixing with the angle by welding and fitting and fixing the angle by cutting grooves in R.C.C, fixing and finishing and the same with C.C. (1:2:4) etc. cost of electricity and other charges all complete and accepted by the Engineer-in-charge. | ||||||
| 1098. | 20.1 | Manufacturing, supplying, fitting and fixing of stair railing of standard height of any design and shape with square box (2 nos.in each tread) made by through welding of 2 nos. 19 mm x 19 mm x 3 mm M.S. angle to provide hand-rail, engraving each box 150mm in the concrete by 50 mm x 50 mm x 6 mm anchor plate at base, welding 38 mm x 6mm F.I. bar inclined plain with the top of the box to fit in the grooved wooden rail by necessary screws including cutting grooves in concrete, mending good the damages with cement concrete (1:2:4), applying french polish of approved quality and colour to wooden hand rail, 2 (two) coats of synthetic enamel paint of approved quality over an anti-corrosive prime coat etc. complete in all respect for all floors and accepted by the Engineer-in-charge. (Exposed area excluding hand rail of railing will be considered for measurement, rate is excluding the cost of wood for hand-rail and cost of painting, polish). | sqm | 4250 | 4308 | 4171 | 4171 |
| 1099. | 20.10.1 | Supplying, fitting and fixing 10 mm thick tempered glass railing in stair of standard height with 62mm dia finished wood with 10mm x 18mm groove for hand rail, fitting 150mm x 50mm finished wood with 10mm x 50mm groove with the plain RCC surface at bottom by 50mm long royal bolt, 10 mm thick tempered glass fitting in the groove between the hand rail and bottom wooden section by glass protector bit/rubber gasket, silicon including carrying, fabricating etc. all complete and accepted by the Engineer-in-charge. (Rate is excluding cost of wood and cost of polish). | sqm | 6672 | 6662 | 6584 | 6584 |
| 1100. | 20.10.2 | Supplying, fitting and fixing 10 mm thick tempered glass railing in stair of standard height with 75 mm x 50 mm finished wood for hand rail and vertical post of both sides of stair railing having 10mm x 38mm groove for fitting the tempered glass, 1.5mm thick 62 mm x 25 mm alluminium U channel fitting with the RCC plain surface at bottom by 50mm long royal bolt,10 mm thick Tempered glass fitting between the wooden groove and alluminium U channel through glass protector bit/rubber gasket, silicon as per drawing, design including carrying, fabricating etc. all complete and accepted by the Engineer-in-charge. (Rate is excluding cost of wood and cost of polish). | sqm | 7578 | 7568 | 7489 | 7489 |
