| SL# | Item Code | Item Description | Unit |
Rate for ZoneA Dhaka & Mymensingh Division |
Rate for ZoneB Chattogram & Sylhet Division |
Rate for ZoneC Rajshahi & Rangpur Division |
Rate for ZoneD Khulna & Barishal Division |
|---|---|---|---|---|---|---|---|
| DIVISION 22 : MISCELLANEOUS ITEMS | |||||||
| 1211. | 22.24.2 | Supplying, laying, fitting & fixing best quality 300 mm dia (internal) machine made R.C.C. pipe over 100 mm thick cement concrete (1:3:6) at base and sides including single brick flat soling and gasket with cement mortar (1:4) joints, cutting and filling trenches up to required depth including excavation of soil etc. all complete in all respect as per type plan and accepted by the Engineer-in-charge (average depth of trench is 1050 mm).(Cement: CEM-II/B-M) | meter | 2274 | 2270 | 2254 | 2253 |
| 1212. | 22.24.3 | Supplying, laying, fitting and fixing best quality 900 mm dia (internal) machine made R.C.C. pipe with socket over 100 mm thick cement concrete (1:3:6) at base and sides including single layer brick flat soling , cutting and filling trenches up to required depth including excavation of soil etc. complete in all respect as per type plan and accepted by the Engineer-in-charge (Cement: CEM-II/B-M) . [Rate is excluding cost of excavation, back-fill, materials for back-fill and bedding] | meter | 11960 | 11942 | 11885 | 11884 |
| 1213. | 22.25 | Supplying, making, fitting & fixing of R.C.C. door/window frame of 155 mm x 65 mm which is made by using M.S. rod (fy = 400 MPa) fabrication work with 24 BWG G.I. wire, steel formworks with minimum cement concrete relates mix ratio (1:2:4) having minimum f'cr = 27 MPa & satisfying a specified compressive strength, f'c= 22 MPa at 28 days and cement conforming to BDS EN-197-1-CEM-I, 52.5N (52.5MPa)/ ASTM-C 150 type–1, best quality 50% quantity of local sand (F.M. 1.2) and 50% quantity of coarse sand (F.M. 2.2), 6 mm down well graded stone chips, screening, making, placing in position, making shutter/formworks water-tight properly, jute hassian, polythene sheet, placing of 100 mm long welded iron hinges with 6 mm dia M.S. rod clamp in position and mixing with mixer machine, casting in forms, compacting properly and curing at least for 21 days, removing shuttering and demoulding etc. all complete including the cost of water, electricity and other charges as per design, drawing and accepted by the Engineer-in-charge. (Considering cross section of the frame 153 mm x 64 mm). | meter | 504 | 501 | 485 | 485 |
| 1214. | 22.26 | Supply & installation of fire rated door complete & accepted by the Engineer-in-charge with the following specification: | sqm | 49059 | 49059 | 49059 | 49059 |
| 1215. | 22.27 | Supplying, fitting and fixing special quality 10 mm thick clear tempered glass digital Honour board including all accessories, heavy type 6 nos. SS clamping devices/SS knob, digital print name plate including making hole etc. complete in all respect as per drawing and direction of the Engineer-in-charge. | sqm | 10956 | 10934 | 10845 | 10845 |
| 1216. | 22.3 | Supplying, fitting and fixing different dia best quality Stainless steel (SS) pipe as curtain rail for door and windows including cutting and fitting fixing as per required measurement and supplying heavy type SS Clamps & 2 nos SS End Caps, necessary screws, electric drill and rowel plug including charge of electricity etc. all complete and accepted by the Engineer-in-charge. | |||||
| 1217. | 22.3.1 | 20 mm dia Stainless steel (SS) pipe with wall thickness 1.00 mm . | meter | 563 | 563 | 559 | 559 |
| 1218. | 22.3.2 | 25 mm dia Stainless steel (SS) pipe with wall thickness 1.20 mm . | meter | 690 | 689 | 686 | 686 |
| 1219. | 22.3.3 | 32 mm dia Stainless steel (SS) pipe with wall thickness 1.20 mm . | meter | 859 | 859 | 855 | 855 |
| 1220. | 22.4 | Supplying, fitting and fixing special quality 10 mm thick clear tempered glass door including all accessories, 1 set floor mounted auto door closure, 2 nos. clamping devices, 1 set locking device, top hinge and handle etc. complete in all respect as per drawing and direction of the Engineer-in-charge. | sqm | 15816 | 15813 | 15786 | 15786 |
