| SL# | Item Code | Item Description | Unit |
Rate for ZoneA Dhaka & Mymensingh Division |
Rate for ZoneB Chattogram & Sylhet Division |
Rate for ZoneC Rajshahi & Rangpur Division |
Rate for ZoneD Khulna & Barishal Division |
|---|---|---|---|---|---|---|---|
| DIVISION 01 : GENERAL, SITE FACILITIES & SAFETY | |||||||
| 21. | 01.15.1 | Hire and Installation of Compression Testing Machine with necessary accessories, machine calibration for testing of concrete cylinders, with Compressive Strength Testing Machine of Rated Capacity: 2000kN, Four Column Frame, Frame Material: Mild Steel, High Frame Stiffness, Diameter of Each Column: Minimum 60 mm, Vertical Clearance: Minimum 320 mm, Piston Stroke: Minimum 100 mm, Piston Diameter: Minimum 250mm, Rated Pressure of the Hydraulic Pump: Minimum 40MPa, Size of the Bearing Plate: Minimum 320x260mm, Outside size: Minimum 950×400×1160mm, Max. piston lift speed: Minimum 50mm/min, Piston free back speed: Minimum 20mm/min, Weight of the Machine : Minimum 500KG, Noise: ≤80Db, Relative indication error: ±1%, Powersupply: 220VAC 750W, Sample Height would be adjusted by screw Column (Movable upper platen), Load Measurement: Load would be Measured Pressure Sensor, Digital Display would show the Current Load and Peak Load, The maximum force value can be maintained and the data measured can be saved when the power is off, The test data can be processed automatically and the test report can be printed, Machine Control: Machine Speed would be controlled by pressure Compensated flow Control Valve.; This item also includes steel unbonded caps for capping of specimen, Elastomeric neoprene pads for capping of specimen, Slide Calipers for measuring dia of specimen, Cylinder mold of 100mm x 200mm Side wall thickness: 5mm; 10mm tamping rod, 300mm long; Rubber mallet; Metal tray for concrete cylinder preparation etc. with required number test work. All complete & accepted by the Engineer-in-charge. (Rate is including the cost of Compression Testing Machine Initial Calibration. Calibration should be performed once in every 12 months) | Per Month | 7005 | 7367 | 7367 | 7367 |
| 22. | 01.15.2 | Additional charge for machine calibration after initial calibration | Per Calibration | 39878 | 39878 | 39878 | 39878 |
| 23. | 01.16 | Supply of Sieve Set with necessary accessories for Sieve analysis of Coarse Aggregate and Fineness Modulus determination of Fine Aggregate using various sieves as per specification of ASTM E11 (Sieve Sizes: 37.5mm, 25mm, 19mm, 14mm, 12.5mm, 9.5mm, 6.3mm, 4.75mm, 2.36mm, 1.18mm, 0.6mm, 0.3mm, 0.15mm, 0.075mm); Mixing tray; Weighing balance, 0.1g sensitivity, 16kg capacity; .All complete & accepted by the Engineer-in-charge. | Per Set | 50738 | 50738 | 50738 | 50738 |
| 24. | 01.17 | Supply of Slump test tools for Slump Test of Hydraulic-Cement Concrete as per ASTM C143/C143M Slump Mold set; 16mm tamping rod etc with required number test work. All complete & accepted by the Engineer-in-charge. | Per Set | 3804 | 3804 | 3804 | 3804 |
| 25. | 01.18 | Supply of construction measuring tool including 2 nos measuring tape of length 30m, 2 nos measuring tape of length 6m, 2 nos steel tape of length 6m, 2 nos slide callipers, 2 nos moisture meter, 2 nos distance meter etc. for site monitoring purpose. | Per Set | 15240 | 15240 | 15240 | 15240 |
| 26. | 01.19.1 | Performing concrete/brick/block compressive strength test including preparation of test sample and specimen, machine operation, relevant data collection and calculation, report preparation, carrying, handling and disposal of material and all other relevant works for on site assessment of building construction materials, test performance must be carried out by experienced lab engineer/technician following the direction of Engineer-in-charge. | per set test | 690 | 690 | 675 | 675 |
| 27. | 01.19.2 | Performing sieve analysis of fine and coarse aggregate including preparation of test sample and specimen, relevant data collection and calculation, report preparation,carrying, handling and disposal of material and all other relevant works for on site assessment of building construction materials, test performance must be carried out by experienced lab engineer/technician following the direction of Engineer-in-charge. | per set test | 911 | 911 | 891 | 891 |
| 28. | 01.19.3 | Performing concrete slump test, cone operation, carrying, handling and disposal of material and all other relevant works for on site assessment of building construction materials following the direction of Engineer-in-charge . | per test | 104 | 104 | 98 | 98 |
| 29. | 01.2.1 | Providing 3 sets as-built drawings subject to Engineer’s approval produced in AutoCAD software in 584.5 mm x 413.5 mm (A-2 size) standard drawing paper, and operating and maintenance manual of the equipment and plant incorporated in the works, if any, in original by the date stated in the particular conditions of contract (PCC). If the contractor does not supply the as-built drawings and operating & maintenance manuals by the date stated in the particular conditions of contract (PCC), or they do not receive the Engineer-in-charge’s approval, the Engineer-in-charge shall withhold the amount stated in the PCC from the payments due to the contractor. The as-built drawings must show the permanent works as actually constructed and reflect the revision of drawings supplied to the contractor during the Contract as well as revisions of drawings supplied to the contractor during the contract. (One set of as-built drawings shall be considered for measurement and payment) | per tender | 29095 | 29095 | 29095 | 29095 |
| 30. | 01.2.2 | Providing additional copy of as-built drawing produced in AutoCAD software in 584.5 mm x 413.5 mm (A-2) standard drawing paper accepted by the Engineer-in-charge. | sqm of drawing sheet | 331 | 331 | 331 | 331 |
