Login

Long Schedule By Division

SL# Item Code Item Description Unit Rate for ZoneA Rate for ZoneB Rate for ZoneC Rate for ZoneD
DIVISION 14 : ALUMINIUM DOOR, WINDOW FRAME & GLASS WORKS
1. 14.1 Supplying fitting and fixing of aluminium swing door with spandrel as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having 1.5 mm thick wall frame (size 101.60 mm, 44.45 mm), 2.0 mm mm thick shutter side (size 54 mm, 46 mm), 0.99 mm thick door glass bit (size 16.54 mm, 15.49 mm, 0.115 kg/m), 1.8 mm thick clousure section (size 101.60 mm, 42.93 mm),1.5 mm thick 106.60 mm clousure cover (0.392 kg/m), 4 mm thick floor bottom (size 101.60 mm, 12.70 mm, 1 kg/m), 1.8 mm thick shutter bottom (size 82.6 mm, 43.99 mm, 0.60 kg/m), 1.8 mm thick shutter top (size 51 mm, 43.99 mm, 1.88 kg/m) and 2.3 mm to 4.01 mm thick handle (size 101.60 mm, 38.10 mm, 25.40 mm short, 1.35 kg/m), 1.5 mm thick 31.75 mm shutter divider(0.535 kg/m), 1.5 mm thick 7.14 mm spandrel section of all aluminum members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like swing door clousure, swing door lock, swing door mohiar, labour charge, fabrication, fitting fixing in position, carriage and electricity charge keeping provision for fitting 5/6 mm thick glass including neoprene sealant etc. complete in all respect as per drawing and accepted by the Engineer-in-charge.
2. 14.1.1 Anodized to bronze colour Show Breakup sqm 8300 8722 8661 8661
3. 14.1.2 Powder coated to any colour Show Breakup sqm 9159 9490 9430 9430
4. 14.10 Supplying, fitting and fixing of aluminium fixed composite window as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having minimum 1.2 mm thick outer bottom (size 75.50 mm, 32 mm, 0.605 kg/m), minimum 1.2 mm thick outer top (size 75.50mm, 28.50 mm, 0.705 kg/m), minimum 1.2 mm thick shutter top (size 33 mm, 26.80 mm, 0.42 kg/m), minimum 1.2 mm thick shutter bottom (size 60 mm, 24.40 mm, 0.589 kg/m), minimum 1.2 mm thick outer side (size 75.50 mm, 19.90 mm, 0.52 kg/m), minimum 1.2 mm thick shutter lock (size 49.20 mm, 25.80 mm,0.543 kg/m), minimum 1.2 mm thick inter lock (size 34.40 mm, 32.13 mm,0.562 kg/m ), minimum 1.2 mm thick bottom cover (size 17.40 mm, 31.78 mm, 0.25 kg/m), minimum 1.2 mm thick fixed bottom (size 76.20 mm, 38.10 mm, 0.640 kg/m), minimum 1.2 mm thick grouve cover ( size 57.15 mm, 15.88 mm, 0.362 kg/m) and minimum 1.2 mm thick top and side (size 76.20 mm, 38.10 mm, 0.769 kg/m) sections all aluminium members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc.including all accessories like sliding door key lock, sliding door wheel, sliding door mohiar, sliding door neoprene, bolts and nuts including sealants, keeping provision for fitting 5 mm thick glass including labour charge for fitting of accessories, making grooves and mending good damages, carriage, and electricity complete in all respect as per drawing and accepted by the Engineer-in-charge. Size up to: 1500 mm x 2100 mm. OK
5. 14.10.1 Anodized to any colour Show Breakup sqm 4086 5093 5054 5054
6. 14.10.2 Powder coated to any colour Show Breakup sqm 4786 5644 5605 5605
7. 14.11 Supplying, fitting and fixing of aluminium top hung/casement windows as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having 1.5 mm thick casement outer (size 38.86 mm, 36.36 mm, 0.395kg/m), 1.9 mm thick casement shutter (size 47.62 mm, 28.57 mm, 0.692 kg/m), and 1.245 mm thick shutter glass clip (size 15.87 mm, 27 mm, 0.188 kg/m) sections of all aluminium members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 1.5 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc.including all accessories 4-bar hinge, casement handle, bolts and nuts keeping provision for fitting 5 mm thick glass including labour charge for fitting of accessories, making grooves and mending good damages, carriage, and electricity complete in all respect as per drawing and accepted by the Engineer-in-charge. OK
8. 14.11.1 Anodized to any colour Show Breakup sqm 10807 11690 11564 11564
9. 14.11.2 Powder coated to any colour Show Breakup sqm 11571 12320 12193 12193
10. 14.12 Supplying fitting and fixing of aluminium corrugated curtain wall as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having minimum 1.2 mm thick bottom cover (size 17.40 mm 31.78 mm, 0.250 kg/m), minimum 1.2 mm thick fixed bottom (size 76.20 m 38.10 mm, 0.640 kg/m), minimum 1.2 mm thick grouve cover(size 57.15 mm, 15.80 mm 0.362 kg/m), minimum 1.2 mm thick top and side (size 76.2 mm, 57.15 mm, 0.769 kg/m) and 1.5 mm thick spandrel (7.14 mm) sections of will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like rivet, screws fixed neoprene etc. complete in all respect as per drawing and accepted by the Engineer-in-charge. OK
11. 14.12.1 Size up to: 3000 mm x 2100 mm
12. 14.12.1.1 Anodized to any colour Show Breakup sqm 7516 8870 8829 8829
13. 14.12.1.2 Powder coated to any colour Show Breakup sqm 8604 10036 9995 9995
14. 14.12.2 Size up to: 3000 mm x 750 mm
15. 14.12.2.1 Anodized to any colour Show Breakup sqm 8924 10581 10512 10512
16. 14.12.2.2 Powder coated to any colour Show Breakup sqm 10203 11374 11305 11305
17. 14.13 Supplying fitting and fixing of aluminium fixed fan light as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having minimum 1.2 mm thick fixed bottom (size 76.2 mm, 38.10 mm, 0.640 kg/m), minimum 1.2 mm thick (17.40 mm, 31.78 mm bottom cover 0.250 kg/m) and minimum 1.2 mm thick grouve cover (size 57.15mm, 15.80 mm, 0.362 kg/m) and minimum 1.2 mm thick top and side section (76.20 mm, 16 mm, 38.10 mm, 0.769 kg/m) fixed with above mentioned frames and all aluminium members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories, neoprene, sealant, nut and bolt etc. complete in all respect as per drawing and accepted by the Engineer-in-charge. OK
18. 14.13.1 Anodized to any colour Show Breakup sqm 5913 6355 6219 6219
19. 14.13.2 Powder coated to any colour Show Breakup sqm 6377 6784 6648 6648
20. 14.14 Supplying fitting and fixing of aluminium fixed louver as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having minimum 1.2 mm thick wall frame (size 76.20 mm, 38.10 mm, 0.564 kg/m),1.5 mm thick louver (size 55.02 mm, 37.39 mm, 0.281 kg/m) and minimum 1.2 mm thick louver outer section (size 39.67 mm, 15.06 mm) and inner inclined aluminium louver section fixed with above mentioned frame and all aluminium members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories, neoprene, sealant, nuts and bolts etc. complete in all respect as per drawing and accepted by the Engineer-in-charge. OK
21. 14.14.1 Anodized to any colour Show Breakup sqm 10881 11727 11562 11562
22. 14.14.2 Powder coated to any colour Show Breakup sqm 12300 13036 12871 12871
23. 14.15 Supplying, fitting, fixing of aluminium sliding fly proof Netting shutter as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having 2.0 mm thick outer frame (size 38mm x 38mm), minimum 1.2 mm thick mosquito net shutter frame mesh section (42.2 mm x13.2mm). All aluminium members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like wheel, sealent, rubber, bolts and nuts keeping provision for fitting fiber mesh including labour charge for fitting of accessories, making grooves and mending good damages, carriage, and electricity, all complete in all respect as per drawing and accepted by the Engineer-in-charge. OK
24. 14.15.1 Anodized to any colour Show Breakup sqm 3798 4220 4205 4205
25. 14.15.2 Powder coated to any colour Show Breakup sqm 4372 4698 4683 4683
26. 14.16 Supplying, fitting and fixing in Aluminium door frames, windows, partitions and curtain wall distortion free glass of approved quality and shade including cost of fitting fixing all necessary accessories etc. complete in all respect as per drawing and accepted by the Engineer-in-charge.
27. 14.16.1.1.1 5 mm thick tinted glass Show Breakup sqm 1492 1489 1473 1473
28. 14.16.1.1.2 5 mm thick tinted tempered glass Show Breakup sqm 2394 2390 2374 2374
29. 14.16.1.2.1 5 mm thick clear glass Show Breakup sqm 1229 1225 1209 1209
30. 14.16.1.2.2 5 mm thick clear tempered glass Show Breakup sqm 2491 2487 2471 2471
31. 14.16.1.3 5 mm thick ambushed glass Show Breakup sqm 1215 1849 1833 1833
32. 14.16.1.4.1 5 mm thick reflective glass Show Breakup sqm 1659 2043 2027 2027
33. 14.16.1.4.2 5 mm reflective tempered glass Show Breakup sqm 2879 2875 2859 2859
34. 14.16.2.1.1 6 mm thick clear glass Show Breakup sqm 1492 1697 1681 1681
35. 14.16.2.1.2 6 mm thick clear tempered glass Show Breakup sqm 2879 2875 2859 2859
36. 14.16.2.2 6 mm thick ambushed glass Show Breakup sqm 2602 2598 2582 2582
37. 14.16.2.3.1 6 mm thick reflecting glass Show Breakup sqm 1839 1835 1819 1819
38. 14.16.2.3.2 6 mm thick reflecting tempered glass Show Breakup sqm 2838 2834 2818 2818
39. 14.16.3.1 8 mm thick clear glass Show Breakup sqm 2189 2184 2163 2163
40. 14.16.3.2 8 mm thick clear tempered glass Show Breakup sqm 3853 3848 3827 3827
41. 14.16.4.1 10 mm thick clear glass Show Breakup sqm 2359 2352 2326 2326
42. 14.16.4.2 10 mm thick clear tempered glass Show Breakup sqm 4273 4266 4240 4240
43. 14.16.5.1 12 mm thick clear glass Show Breakup sqm 3094 3087 3061 3061
44. 14.16.5.2 12 mm thick clear tempered glass Show Breakup sqm 5937 5930 5904 5904
45. 14.16.6.1 13.52mm (6mm tempered glass+1.52mm PVB lamination+6mm tempered glass) foreign made tempered lamination glass Show Breakup sqm 9080 9071 9034 9034
46. 14.16.6.2 13.52 mm(6mm low-E glass+1.52mm PVB lamination+6mm glass) foreign made tempered lamination glass Show Breakup sqm 11369 11359 11322 11322
47. 14.16.7.1 17.52 mm (8mm tempered glass+1.52mm PVB lamination+8mm tempered glass) foreign made tempered double glazing glass Show Breakup sqm 11065 11052 11002 11002
48. 14.16.7.2 17.52 mm(8mm tempered Low-E glass+1.52mm PVB lamination+8mm clear tempered glass) foreign made tempered double glazing glass Show Breakup sqm 12452 12439 12389 12389
49. 14.16.8.1 24mm (6mm tempered glass+12mm argon gas filled gap+6mm tempered glass) foreign made tempered double glazing glass Show Breakup sqm 7977 7964 7911 7911
50. 14.16.8.2 24 mm(6mm clear tempered Low-E glass+12mm argon gas filled gap+6mm clear tempered glass) foreign made tempered double glazing glass Show Breakup sqm 9226 9212 9160 9160
51. 14.17 Supplying, fabrication and Installation of approved colour 4 mm thick Fire Rated Aluminium Composite Panel (Alucobond/Alcopanel/Alpolic or equivalent) of 0.5 mm thick aluminum skin cover both side with 3 coat PVDF on the front face panel sheet and non-combustible mineral filled core/ aluminum hydroxide filled (fr) core, skin cover sheet in Peralumam -100, ENAW -5005 (AlMg1)on the both side(Total weigt.7.60kg/sqm), as per US Architectural Aluminium Manufacturer's Association (AAMA) in column, beam and wall surface providing with 44 mm x 44 mm x 1.5 mm aluminum section including supply of necessary hardwares, consumables, scaffolding etc fitted with necessary accessories like rivet, screw, rowel bolt etc. all complete in all respect as per drawing and direction of the Engineer-in-charge Show Breakup sqm 13051 13048 12994 12994
52. 14.18 Supplying, fitting and fixing of aluminium curtain wall with aluminium top hung/casement windows as per the US Architectural Aluminium Manufacturer's Association (AAMA) standard specification and BDS 1879:2014 having 134mm , 70mm, 3.5mm curtain wall sub-mullim outer and inner frame,3.0 mm thick casement shutter (size 58.40 mm, 37.20 mm,57.40 mm ) 1.2 mm thick shutter glass strips, all aluminium member will be powder coated with coat not less than 1.5 micron in thickness including all accessories 4 bar hinge casement handle, 50 mm x 50 mm x 6 mm aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. Show Breakup sqm 13410 13404 13320 13320
53. 14.19 Supplying, fitting and fixing of aluminium curtain wall with aluminium top hung/casement windows as per the US Architectural Aluminium Manufacturer's Association (AAMA) standard specification and BDS 1879:2014 having 100 mm , 50mm, 2mm curtain wall sub-mullim outer and inner frame, 3.0 mm thick casement shutter (size 58.40 mm, 37.20 mm,57.40 mm ), 1.2 mm thick shutter glass strips, all aluminium member will be powder coated with coat not less than 1.5 micron in thickness including all accessories 4 bar hinge casement handle, 50 mm x 50 mm x 6 mm aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. Show Breakup sqm 12117 12102 11944 11944
54. 14.2 Supplying fitting and fixing of aluminium swing door as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having 1.5 mm thick wall frame (size 101.60 mm, 44.45 mm, 83.21 mm), 2.0 mm thick shutter side (size 54 mm, 46 mm), 0.99 mm thick door glass bit (size 16.54 mm, 15.49 mm, 0.115 kg/m), 1.8 mm thick clousure section (size 101.60 mm, 42.93 mm),1.5 mm thick 106.60 mm clousure cover (0.392 kg/m), 4 mm thick floor bottom (size 101.60 mm, 12.70 mm, 1 kg/m), 1.8 mm thick shutter bottom (size 82.6 mm, 43.99 mm, 0.60 kg/m), 1.8 mm thick shutter top (size 51 mm, 43.99 mm, 1.88 kg/m) and 2.3 mm to 4.01 mm thick handle (size 101.60 mm, 38.10 mm, 25.40 mm short, 1.35 kg/m) section of all aluminum members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like swing door clousure, swing door lock, swing door mohiar, labour charge, fabrication, fitting fixing in position, carriage and electricity charge keeping provision for fitting 5 mm thick glass including neoprene sealant etc. complete in all respect as per drawing and accepted by the Engineer-in-charge.
55. 14.2.1 Anodized to any colour Show Breakup sqm 7588 7876 7823 7823
56. 14.2.2 Powder coated to any colour Show Breakup sqm 8274 8442 8389 8389
57. 14.20 Supplying, fitting and fixing of aluminium curtain wall and aluminium top hung/casement windows ad per the US Architectural Aluminium Manufacturer's Association (AAMA) standard specification and BDS 1879:2014 having 50 mm , 50 mm, 2 mm curtain wall sub-mullim outer and inner frame,3.0 mm thick casement shutter (size 58.40 mm, 37.20 mm,57.40 mm ) ,1.2 mm thick shutter glass strips, all aluminium member will be powder coated with coat not less than 1.5 micron in thickness including all accessories 4 bar hinge casement handle, 50 mm x 50 mm x 6 mm aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. Show Breakup sqm 10680 10666 10507 10507
58. 14.21 Supplying, fitting and fixing of aluminium curtain wall along with 10 mm thick clear tempered glass as per the US Architectural aluminium Manufacturer's Association (AAMA) Standard Specification and BDS 1879:2014 having 115 mm , 64 mm, 3 mm curtain wall sub-mullim outer and inner frame, 3.0 mm thick casement shutter (size 58.40 mm, 37.20 mm,57.40 mm ) ,1.2 mm thick shutter glass strips, all aluminium member will be powder coated with coat not less than 1.5 micron in thickness including all accessories 4 bar hinge casement handle, 50 m x 50mm x 6m aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. Show Breakup sqm 12005 11999 11923 11923
59. 14.22 Supplying, fitting and fixing of 12 mm thick clear tempered glass wall upto 3.0 m height with vertical fin glass support of same thickness and support shall be at least 1.2 m c/c fixed properly with glass by silicon glue with supply and fittings of all required accessories such as SS u channel, nut bolts, aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in- charge. Show Breakup sqm 21510 21500 21414 21414
60. 14.23 Supplying, fitting and fixing of 12 mm thick tempered glass wall from 3.0 m to 6.0 m height with spider point fixing joint and vertical fin glass support of same thickness, support shall be at least 1.2 m c/c fixed properly with main glass by silicon glue with supply and fittings of all required accessories such as SS u chennel, nut bolts, aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. Show Breakup sqm 22891 22885 22805 22805
61. 14.24 Supplying, fitting and fixing of 12 mm thick clear tempered glass wall from 6.0 m to 8.2 m height with spider point fixing joint and vertical/ horizontal fin glass support of double thickness, support shall be at least 2 m c/c fixed properly with main glass by silicon glue with supply and fittings of all required accessories such as SS u chennel, nut bolts, aluminium angle, steel rowel bolt, screws , rivets norton tape masking tape, structural sealant, gum bracket rod etc. all complete in all respect as per drawing and direction of the Engineer-in-charge. Show Breakup sqm 23545 23542 23458 23458
62. 14.25 Supplying fitting and fixing of aluminium box fixed louver as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification having 50mm x 25 mm, 1.5 mm thick outer section and horizantally @ 75 mm c/c fixed with above mentined frame and all aluminium members will be anodized to aluminium with a coat not less than 15 micron in thickness and density of 4 mg per square cm etc. including all accessories, neoprene, sealant, nuts and bolts etc. complete in all respect as per drawing and accepted by the Engineer. OK
63. 14.25.1 Anodized to any colour Show Breakup sqm 8761 8756 8726 8726
64. 14.25.2 Powder coated to any colour Show Breakup sqm 9870 9865 9836 9836
65. 14.26 Supplying fitting and fixing of aluminium ventilation louver as per the U.S Architectural Aluminium Manufacturer's Association ( AAMA) standard specification having 38 mmx 38mm, 2 mm thick outer frame, 39.67 mm x15.06 mm louver outer of minimum 1.2 mm thick and horizontal louver 55.02 mm x 37.39 mm of 1.50 mm thick @ 25 mm c/c fixed with above mentioned frame and aluminium members will be Powder coated colour etc. including all accessories, neoprene, sealant, nuts and bolts etc. complete in all respect as per drawing and accepted by the Engineer. OK
66. 14.26.1 Anodized to any colour Show Breakup sqm 15659 15832 15735 15735
67. 14.26.2 Powder coated to any colour Show Breakup sqm 17585 17744 17647 17647
68. 14.3 Supplying, fitting and fixing of aluminium composite swing doors with fixed partition as per the U. S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having 1.5 mm thick wall frame (size 101.60, 44.45 mm, 0.86 kg/m), 1.8 mm thick shutter side (size 54 mm, 46 mm, 1.2 kg/m ), 0.99 mm thick door glass bit (size 16.54 mm, 14. 49 mm, 0.115 kg/m), 1.8 mm thick closure section (size 101.54 mm, 42.93 mm, 1.20 kg/m), 1.5 thick closure cover (101.60 mm, 0.45 kg/m), 4 mm thick floor bottom (size 101.60 mm, 12.70 mm, 1 kg/m), 1.8 mm thick shutter bottom (size 86.60 mm, 43.99 mm , 0.60 kg/m), 1.8 mm thick shutter top (size 51 mm, 43.99 mm, 1.88 kg/m) 2.3mm to 4.01mm thick handle (short) (size 101.60 mm, 38.10 mm, 25.40 mm, 1.35 kg/m), minimum 1.2 mm thick top and side (size 101.60 mm, 44.45 mm, 0.934 kg/m), minimum 1.2 mm thick bottom (size 101.35 mm, 44.45 mm, 0.734 kg/m), minimum 1.2 mm thick bottom cover (44.32 mm, 19.61mm, 0.333 kg/m), minimum 1.2 mm thick grouve cover (size 83.21 mm, 16.00 mm, 0.485 kg/m), 0.99 mm thick fixed glass protector (size 39.09 mm, 14.81 mm, 0.188 kg/m), 0.99 mm thick fixed glass protector bit (size 15.75 mm, 14.81 mm, 0.13 kg/m) section of all aluminum members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. (Total weight min 69.699 kg) keeping provision for 5 mm of glass panes with cost including all accessories like swing door clouser, swing door lock , swing door mohair, flush bolt , bolts and nuts including sealants, labour charge for fitting , fixing by angles, screws, mohiar, washer, machinery, cost of fabrication, making the grooves, mending good the damages, electricity etc. complete in all respect as per drawing and accepted by the Engineer-in-charge.
69. 14.3.1 Anodized to any colour Show Breakup sqm 3911 4268 4237 4237
70. 14.3.2 Powder coated to any colour Show Breakup sqm 4319 4650 4619 4619
71. 14.4 Supplying, fitting and fixing of aluminium sliding doors as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having minimum 1.2 mm thick outer bottom (size 75.50 mm, 17.79 mm, 0.47 kg/m), minimum 1.2 mm thick outer top (size 75.50 mm, 28.50 mm, 0.705 kg/m) ,minimum 1.2 mm thick shutter top (size 33 mm, 26.80 mm, 0.42 kg/m), minimum 1.2 mm shutter bottom (size 60 mm, 24 mm, 0.589 kg/m), minimum 1.2 mm thick outer side(size 75.50 mm, 19.90 mm, 0.52 kg/m),minimum 1.2 mm thick shutter lock (size 49.20 mm, 25.80 mm, 0.543 kg/m), minimum 1.2 mm thick inter lock (size 34.40 mm, 32.13 mm, 0.562 kg/m) sections all aluminum members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like handle, sliding door key lock , sliding door wheel, sliding door mohiar, sliding door neoprene, bolts and nuts including sealants, keeping provision for fitting 5mm thick glass including labour charge for fitting of accessories, making grooves and mending good damages, carriage, and electricity complete in all respect as per drawing and accepted by the Engineer-in-charge. Size up to: 2100 mm x 2100 mm OK
72. 14.4.1 Anodized to any colour Show Breakup sqm 3269 3457 3414 3414
73. 14.4.2 Powder coated to any colour Show Breakup sqm 3794 3789 3746 3746
74. 14.5 Supplying, fitting and fixing of aluminium sliding doors with mosquito mesh as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having minimum 1.2 mm thick outer bottom (size 95 mm, 22.39 mm, 0.476 kg/m), minimum 1.2 mm thick outer top (size 95.00 mm, 28.50 mm, 0.749 kg/m), minimum 1.2 mm thick shutter top (size 33 mm, 26.80 mm, 0.42 kg/m), minimum 1.2 mm shutter bottom (size 60 mm, 24.40mm, 0.589 kg/m), minimum 1.2 mm thick outer side(size 95.00 mm, 19.50 mm, 0.591kg/m), minimum 1.2 mm thick shutter lock (size 49.20 mm, 25.80 mm, 0.543 kg/m), minimum 1.2 mm thick inter lock (size 34.40 mm, 32.13 mm 0.562 kg/m), minimum 1.2 mm thick shutter divider (size 31.75 mm, 0.535 kg/m) sections all aluminum members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like handle, sliding door key lock , sliding door wheel, sliding door mohiar, sliding door neoprene, bolts and nuts including sealants, keeping provision for fitting 5mm thick glass including labour charge for fitting of accessories, making grooves and mending good damages, carriage, and electricity complete in all respect as per drawing and accepted by the Engineer-in-charge. Size up to: 2100 mm x 2100 mm" OK
75. 14.5.1 Anodized to any colour Show Breakup sqm 4610 5773 5722 5722
76. 14.5.2 Powder coated to any colour Show Breakup sqm 5435 6315 6264 6264
77. 14.6 Supplying, fitting and fixing of aluminium sliding doors with spandrel as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having minimum 1.2 mm thick outer bottom (size 75.50 mm, 17.79 mm, 0.605 kg/m), minimum 1.2 mm thick outer top (size 75.50 mm, 28.50 mm, 0.705 kg/m), minimum 1.2 mm thick shutter top (size 33 mm, 26.80 mm, 0.42 kg/m), minimum 1.2 mm thick shutter bottom (size 60 mm, 24 mm, 0.589 kg/m), minimum 1.2 mm thick outer side(size 75.50 mm, 19.90 mm, 0.52 kg/m), minimum 1.2 mm thick shutter lock (size 49.20 mm, 25.80 mm, 0.543 kg/m), minimum 1.2 mm thick inter lock (size 34.40 mm, 32.13 mm, 0.562 kg/m), minimum 1.2 mm thick shutter divider (size 31.75 mm, 0.535 kg/m) and minimum 1.5 mm thick spandrel (7.14 mm) sections all aluminium members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like sliding door key lock, sliding door whee , sliding door mohiar, sliding door neoprene, bolts and nuts including sealants, keeping provision for fitting 5mm thick glass including labour charge for fitting of accessories, making grooves and mending good damages, carriage, and electricity complete in all respect as per drawing and accepted by the Engineer-in-charge. Size up to: 1800 mm x 2100 mm OK
78. 14.6.1 Anodized to any colour Show Breakup sqm 4976 6061 6010 6010
79. 14.6.2 Powder coated to any colour Show Breakup sqm 5795 6730 6680 6680
80. 14.7 Supplying, fitting and fixing of aluminium sliding window as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having minimum 1.2 mm thick outer bottom (size 75.50 mm, 32mm,0.605 kg/m ), minimum 1.2 mm thick outer top (size 75.50 mm, 28.50 mm0.705 kg/m), minimum 1.2 mm thick shutter top (size 33 mm.26.80 mm,0.42 kg/m), minimum 1.2 mm thick shutter bottom (size 60mm, 24.40 mm,0.589 kg/m), minimum 1.2 mm thick outer side (size 75.50 mm,19.90 mm,0.52 kg/m), minimum 1.2 mm thick shutter lock (size 49.20 mm 25.80 mm,0.543 kg/m) and minimum 1.2 mm thick inter lock (size 34.40 mm, 32.13 mm,0.562 kg/m) sections all aluminium members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like sliding door key lock, sliding door wheel, sliding door mohiar, sliding door neoprene, bolts and nuts including sealants, keeping provision for fitting 5 mm thick glass including labour charge for fitting of accessories, making grooves and mending good damages, carriage, and electricity complete in all respect as per drawing and accepted by the Engineer-in-charge. OK
81. 14.7.1 Size up to: 1500 mm x 1400 mm.
82. 14.7.1.1 Anodized to any colour Show Breakup sqm 3814 4088 4045 4045
83. 14.7.1.2 Powder coated to any colour Show Breakup sqm 4583 4576 4534 4534
84. 14.7.2 Size up to: 900 mm x 1400 mm
85. 14.7.2.1 Anodized to any colour Show Breakup sqm 5190 5584 5529 5529
86. 14.7.2.2 Powder coated to any colour Show Breakup sqm 6523 6514 6458 6458
87. 14.8 Supplying, fitting and fixing of aluminium sliding window with mosquito mesh as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having minimum 1.2 mm thick outer bottom (95.00 mm, 38.00 mm outer bottom,0.72 kg/m ), minimum 1.2 mm thick outer top (95.00 mm, 28.5 mm outer top, 0.75 kg/m), minimum 1.2 mm thick shutter top (size 33 mm.26.80 mm,0.42 kg/m), minimum 1.2 mm thick shutter bottom (size 60mm, 24.40 mm,0.589 kg/m), minimum 1.2 mm thick outer side (95.00 mm, 19.50 mm outer side ,0.591 kg/m), minimum 1.2 mm thick shutter lock (size 49.20 mm 25.80 mm,0.543 kg/m) and minimum 1.2 mm thick inter lock (size 34.40 mm, 32.13 mm,0.562 kg/m) sections all aluminium members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like sliding door key lock, sliding door wheel, sliding door mohiar, sliding door neoprene, bolts and nuts including sealants, keeping provision for fitting 5 mm thick glass including labour charge for fitting of accessories, making grooves and mending good damages, carriage, and electricity complete in all respect as per drawing and accepted by the Engineer-in-charge. OK
88. 14.8.1 Size up to: 1524 mm x 1372 mm
89. 14.8.1.1 Anodized to any colour Show Breakup sqm 5119 5495 5450 5450
90. 14.8.1.2 Powder coated to any colour Show Breakup sqm 6222 6196 6150 6150
91. 14.8.2 Size up to: 1280 mm x 1372 mm
92. 14.8.2.1 Anodized to any colour Show Breakup sqm 5828 6248 6193 6193
93. 14.8.2.2 Powder coated to any colour Show Breakup sqm 7054 7026 6972 6972
94. 14.8.3 Size up to: 762 mm x 610 mm
95. 14.8.3.1 Anodized to any colour Show Breakup sqm 12106 12907 12758 12758
96. 14.8.3.2 Powder coated to any colour Show Breakup sqm 14430 14384 14234 14234
97. 14.9 Supplying, fitting and fixing of equal diamension frame(EDF) section aluminium sliding window with mosquito mesh as per the U.S. Architectural Aluminium Manufacturer’s Association (AAMA) standard specification and BDS 1879:2014 having 1.5 mm thick outer bottom (size 91.50 mm, 38.00 mm), 1.5 mm thick outer top (size 91.00 mm, 28.70 mm), 1.5 mm thick shutter top (size 65.00 mm, 27.30 mm), 1.5 mm thick shutter bottom (size 72.20 mm, 24.65 mm), 1.5 mm thick outer side (size 91.50 mm, 28.50 mm), 1.5 mm thick shutter lock (size 65.30 mm, 26.00 mm), 1.5 mm thick shutter inter lock (size 55.20 mm, 26.00 mm), 1.5 mm thick mesh section (size 55.20 mm, 13.20 mm), all aluminium members will be anodized to aluminium bronze/silver/ss/black colour with a coat not less than 15 micrones in thickness or powder coated to any colour with a coat not less than 25 micrones in thickness and density of 4 mg per square cm etc. including all accessories like sliding door key lock, sliding door wheel, sliding door mohiar, sliding door neoprene, bolts and nuts including sealants, keeping provision for fitting fiber mesh including labour charge for fitting of accessories, making grooves and mending good damages, carriage, and electricity complete in all respect as per drawing and accepted by the Engineer-in-charge.
98. 14.9.1 Size up to: 1524 mm x 1372 mm
99. 14.9.1.1 Anodized to any colour Show Breakup sqm 6482 6968 6899 6899
100. 14.9.1.2 Powder coated to any colour Show Breakup sqm 6767 7338 7292 7292
101. 14.9.2 Size up to: 1280 mm x 1372 mm
102. 14.9.2.1 Anodized to any colour Show Breakup sqm 7025 7573 7518 7518
103. 14.9.2.2 Powder coated to any colour Show Breakup sqm 7704 8340 8285 8285
104. 14.9.3 Size up to: 762 mm x 610 mm
105. 14.9.3.1 Anodized to any colour Show Breakup sqm 14305 15340 15190 15190
106. 14.9.3.2 Powder coated to any colour Show Breakup sqm 15579 16779 16629 16629
Help